Read the pattern without ignoring the geometry
The opening positions begin near the middle, then their vertical separation grows as the early difficulty develops. Recognizing the high-low pattern helps you anticipate which way the next transition goes.
That pattern does not make every tap interval identical. The distance between gates varies, and the heading you carry out of one gate changes the next approach. Use the visible opening to confirm the transition rather than following a memorized beat regardless of position.
Connect the exit to the next entry
After a higher gap, you need a route toward the following lower one. If you leave the higher gate still climbing sharply, part of the available space will be spent undoing that heading. Reducing the climb during the previous crossing can make the next descent more manageable.
The reverse applies after a lower gap. Think of the space between gates as room to change both height and direction of travel. A flip changes curvature, so the transition needs to begin before the next branch is immediately beside you.
Notice where the pattern changes its demand
As the high-low separation increases and the openings narrow, a route that worked for the first two gates can stop being sufficient. Diagnose the first transition that breaks down instead of treating the whole run as one timing failure.
Daily trails use different position patterns, so this Classic observation is not a universal rule for every course. On an unfamiliar arrangement, return to reading the actual next gap. The transferable skill is linking safe exits to planned approaches, not assuming that every high opening must always be followed by a low one.